Thursday, June 13, 2019

Chemical engineering course work in clean process technolgy Coursework

Chemical engineering course work in clean process technolgy - Coursework ExampleNuclear life force provides a carbon free alternative to fossil open fire, but after the Fukushima disaster in 2011, the acceptance of nuclear plants has become very difficult. Most brisk generating plants will continue to be based on fossil fuels. A study by BP plc., titled Energy Outlook 2035, quoted by Mark Webster, shows that everywhere the next 20 years CO2 emissions from the non-OECD region will grow as shown in Figure 1 (Webster).The chart shows that CO2 emissions from the OECD countries would level dispatch at the levels prevailing in 2013 but the emissions from the non-OECD countries would rise rapidly. The red line marked IEA 450 is the target of 450 ppmv (parts per million volume) of CO2 concentration in the atmosphere that the internationalistic Energy Agency considers as the absolute upper limit to prevent a temperature rise exceeding 20C. This is considered the upper limit of temperatu re rise to prevent portentous climate change (Webster).The vast majority of these new power plants will be coal fired since coal is the most abundant fossil fuel. A coal plant has an operating life of about 50 years and the need is for a technology that scum bag be retrofitted to existing fossil fuel power plants to capture CO2 emissions from the flue gases before they are emitted into the atmosphere.Post-combustion chemical absorption technology is the most promising of the carbon capture technologies presently available. blow dioxide emissions also occur from many other industrial processes other than power generation. These include steel mills, cement plants and oil refineries. Post-combustion chemical absorption technology can be readily applied to these industries as well.The schematic diagram of the post-combustion chemical absorption process is as shown in Figure 2 from a unveiling by Dr. Stanley Santos of the International Energy Agency. The flue gases

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.